Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 1000ML |
Material | BOROSILICATE |
Usage/Application | Industrial |
Material Grade | GLASS |
Mixing Arrangement | AGITATOR |
Max Pressure | VACUUM |
Automation Grade | Semi-Automatic |
Features | HIGH SPEED MIXING |
Reactor Orientation | VERTICAL |
Size | 1000ML |
LELESIL Offer glass thin film distillation system we produce uses high borosilicate glass 3.3.
The metal parts in contact with the crude materials are 316L stainless steel and the wiper is made
of PTFE. The main body has excellent sealing and corrosion resistance.
The thin film evaporator consists primarily of a heating jacket, an internally rotatable wiper, and a condenser and vacuum system. In the high vacuum system, the feeding liquid is fed from the upper part of the evaporator. After that, under the driving of the gravity and the rotating wiper, a downwardly swirling film is formed along the inner wall surface of the jacket.
The finishing fluid is discharged from the bottom discharger, while the steam is discharged
from the upper part. The system is very suitable for liquid materials with high viscosity, easy crystallization, easy scaling, suspended solids or heat sensitive properties, and is widely used for pretreatment and finishing of products in the chemical, pharmaceutical, health care and other industries.
SALIENT FEATURES of lelesil thin film evapourator:
1. Maximum Evaporation in Single Pass
2. The Roller – wiper system (fully corrosion resistant construction) makes possible to
attain a homogenous mass of liquid mixture and high wiping speed maximize evaporation efficiency.
3. Minimal to no degradation of thermally unstable materials.
4. The Capability of Handling High Viscosities.
5. High surface to volume ratio
6. Higher Heat Flux due to uniform film formation
7. No dry spots and no fouling.
8. Easy to clean, install and maintain
9. Thin- Film – Evaporators are available in DN-80 X 0.15m² to DN-150 X 0.5m² Evaporation surface Area.
10. Thin – Film – Evaporators can be run up to 200°C Product side and 230°C Jacket Side.
11. Thin – Film- Evaporators can be run under Jacket Pressure of 2.0 bar (g) and evaporator can be operated at the vacuum of 5mm Hg to 0.005mm Hg.
12. All wetted – parts that make contact with liquids or gases are made from high precision Borosilicate Glass Tube and PTFE
Additional Information:
Product Details:
Color | Transparent |
Capacity | 10 - 200 Liters |
Material of Construction | Borosil Glass |
Country of Origin | Made in India |
1Liter-100Liter Laboratory Double Layer Jacketed Chemical Stirred vacuum Jacket Glass Reactor
Description of 10L 20L 30L 50L 80L Jacketed glass reactor
Jacketed glass reactor is with double glass design, the inner layer placed with reaction menstruum can do the mixing reaction, and the interlayer can be added with different cold and heat sources (frozen liquid, hot water or hot oil) to do loop heating or cooling reaction. At a set constant temperature, the mixing reaction can be carried out in the sealed glass reactor according to requirements under atmospheric pressure or negative pressure conditions, and the reflux and distillation of the reaction solution can also be done. It is the ideal pilot and production equipment of modern fine chemicals, biological pharmacy and synthesis of new materials.
key features
1. Integrated stainless steel tube , mobile frame structure, reaction vessel cover with 5 necks for re-fluxing, liquid feeding, temperature measurement, etc.
2. G3.3 borosilicate glass, good chemical and physical properties
3. PTFE seal, to keep high-precision sealing under poor working state
4. AC gear reducer motor, strong torsion, no noise
5. PTFE stirring paddle is suitable for stirring and mixing different kinds of materials
6. PTFE discharge valve can discharge materials thoroughly and quickly
Product Details:
Color | Transparent |
Capacity | 10 - 200 Liters |
Material of Construction | Borosil Glass |
Country of Origin | Made in India |
Type : Glass reactor Capacity - 05,10,20,30,50 & 100 Liter
Working Pressure: -1.0 (FV) to +1.0 bar as per Capacity
Working Temperature: -20 °C to + 180 °C
Material of Construction: Borosilicate glass 3.3, PTFE, PFA, PEEK, QUARTZ
We At Lelesil Offer Complete Customized Glass Reactors with
Complete Borosilicate Glass,
Glass-PTFE
Glass – SS 316 - PTFE
It is specifically designed for applications in kilo lab, for chemical process development and GMP complaint API syntheses.
The reactor's explosion materials allow safe processing of solvents and acids in a completely sealed reaction vessel.
The compact reactor system can easily be modified: interchangeable reaction vessels of 5 to 100 liters including interchangeable stirrers are available.
The Glass Reactor is Equipped with a Lifting Lowering Device for Easy & Efficient Opening & Cleaning as standard or Flexi Design.
Additional Information:
Product Details:
Color | Transparent |
Capacity | 10 - 200 Liters |
Country of Origin | Made in India |
MIXING REACTOR
Mixing reactor systems represent a long-term evaluation of equipment and customer requirements. The mixing reactors are preferably used for wide applications in laboratory, pilot plant & for small-scale production. They reduce the need for investment in permanent installations & also reduce the pressure & temperature permanent installations & also reduce the pressure & temperature 304 & stainless steel 316. All structures are available in trolley-mounted form. losses resulting from poor Installation.
These reactors are available with spherical shape & in cylindrical shape. These reactors are also available in cylindrical jacketed form.
Material of construction
· Stirrer Drive, non-flameproof or flameproof Motor.
· Stirrer material of construction glass or PTFE Lined.
· Stirrer shape glass impeller stirrer with PTFE blades, vortex stirrer, propeller stirrer & anchor stirrer.
· Stirring assembly with bellow seal or with mechanical seal.
· Supporting structure carbon steel, epoxy coated carbon steel, stainless steel 304 & stainless steel 316. All structures are available in trolley-mounted form.
· Closing valve drain valve or flush bottom outlet valve.
Capacity |
Cylindrical Cat. Ref. |
20 L |
SMR 20 |
50 L |
SMR 50 |
100 L |
SMR 100 |
200 L |
SMR 200 |
300 L |
SMR 300 |
Product Details:
Color | Transparent |
Capacity | 10 - 200 Liters |
Material of Construction | Borosil Glass |
Country of Origin | Made in India |
Pharmaceutical industry application 50L jacketed glass crystallization equipment, popular used in cbd oil process for purification / high efficient dewaxing, very easy and convenient operation as this jacketed glass crystallization reactor compound function of reaction, filtration and solvent recovery in one equipment.
Your best choice for ethanol extraction, solvent recovery, crystallization, isolation and liquid & solid separations. Ultrasonic homogenizer function could be customized.
1 | Condenser | 2 | Stirring motor |
3 | Collection flask | 4 | Discharging valve |
5 | PTFE stirring paddle | 6 | Sand core filter plate |
7 | Strong stainless steel frame | 8 | Vacuum pump |
9 | Ultrasonic homogenizer | 10 | Filtration reactor controller |
11 | Ultrasonic controller | 12 | Collection flask |
13 | Condenser + collection flask, recycle organic reagent, and protect vacuum pumps | ||
14 | Universal wheel convenient moving | 15 | Heating & cooling circulator bath |
Product Details:
Minimum Order Quantity | 1 Piece |
Color | Transparent |
Capacity | 10 - 200 Liters |
Material of Construction | Borosil Glass |
Country of Origin | Made in India |
Additional Information:
Product Details:
Capacity | 10 - 200 Liters |
Material of Construction | Borosil Glass |
Country of Origin | Made in India |
The Glass Jacketed filter glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment, jacketed filter reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces material losses.
Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed.
Filter reactors for single or multi-step reactions and filtrations in the same vessel, they also eliminate material transfers and reduce losses.
Modular filter assembly can be easily detached for cleaning and filter paper replacement.
Center downward drain port with angled drain grooves allows easy material drainage.
All PTFE filter components ensure clean and long lifespan operations.
Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.
Adjustable stirring rate provides great torque or high speed.
PTFE stirring rod bearing for reliable and quiet operation.
Optional multi-layer stirring blades for optimal reaction results.
Wide range of temperature operations, from -110°F to 400°F.
Large condenser cooling surface for exceptional condensation performance.
Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
Easily visual operation with digital speed and temperature displays.
Heavy duty stainless steel supporting framework with lockable casters for mobility and stability.
. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.
Glass material High borosilicate glass 3.3
· Rotation controller Digital controller with variable frequency drive
Rotation speed: 100 to 400 rpm
· Maximum jacket pressure 0.3 Kg/cm2
·
· Drain valve Flush seal design with large opening and flat flange clamp
· Agitator Anchor design, type-304 stainless steel reinforced PTFE structure
· Funnel Pressure equalizing
· Vacuum gauge Mechanical
· Glass vessel temperature range -10°degs to 180°Degs
· Vacuum level 700 mm Max
Product Details:
Usage/Application | R & D,Pharma |
Brand | LELESIL |
Material | Borosilicate Glass |
Lab Glass Reactor
Lelesil Offers Specialized Borosilicate & Quartz vessel option to choose from our standard range.
Beside the manufacturing of our Standard Vessels / Reactors, we specialize in producing reactors as per customer''s requirement.
We can fabricate the reactor as per drawing or or Design or a Published Article for Process.
Our experiences team of Glass Blowers , Designer & Engineers can also assist in designing of glass reactor as per your requirement.
Reactor Options:
· Single Wall,
· Double wall
· Triple Wall Glass Reactor
Standard Operating Conditions for Glass Reactors :
Temperature :– 20°C up to 180 °C
Pressure :Full vacuum up to 0.5 bar
Capacities : 500 ml L up to 100 Liters
Salient Features
• Glass Reactors made from Germany Raw Material.
• Lab Reactor system suitable for most bench top fume hoods.
• Stirrer with suitable mechanical seal/stuffing box/magnetic seal.
• Skid Mounted and quick release clamp for easy installation & removable of glassware.
• Suitable for vacuum condition
• Flush bottom with minimum dead volume.
• Overhead Stirrer geared motor with built-in speed controller & display.
• Measurement Marking on the vessel.
• Interchangeable Stirrer anchor, propeller, turbine Digital temperature indicator
Optional Accessories :
· Hot water/oil circulator 20 – 200 Degs
· Water Chiller - 20 to 25 Degs
· Heating /Cooling Circulating System -10 to 180 Degs
· Vacuum Pump,
· PH probe with transmitter Controller
· Pressure Gauge+ Vacuum Dual Gauge
Product Details:
Usage/Application | Chemical Laboratory |
Type | Glass Fractional Distillation System |
Mounting | Water Distiller |
Material | Glass |
Brand | Aarya Enterprise |
Country of Origin | Made in India |
The unit has been designed to suit the customers requirement of combination of versatile reaction / distillation or combination for pilot plant work. This has a flexibility of working at atmospheric pressure as well as under vacuum.
Typical unit has a reaction vessel fitted in a metal heating/cooling bath having facility for heating and cooling bath by means of heating/cooling Fluids as a media. The Standard system is equipped with stirrer heaving mechanical seal, a packed column on the side neck of the vessel, reflux divider, coil type condenser and or receiver system having a product, cooler, vent, drain and vacuum valves, Option of speed variation by machanical variator or electronic variator can be provided. Receiver system is equipped with product cooler. Vent / vaccum valve and drain valve.
The above unit are available in 10 Ltr., 20 Ltr., 50Ltr.,100 Ltr., 200 Ltr. & 300Ltr capacity with spherical reactor.
Optional Items
Heating mantle instead of jacketed heating / cooling bath.
Simple drain Valve instead of flush bottom valve.
MS PTFE lined stirrer instead of glass stirrer.
Variable frequency drive for variable speed.
Cylindrical vessel instead of spherical vessel. TM
Product Details:
Usage/Application | Simple Distillation Unit |
Design Type | Standard |
Size | Simple Distillation Unit |
Color | Simple Distillation Unit |
Nitrite | Simple Distillation Unit |
Chloride | Simple Distillation Unit |
Simple Distillation Unit
This is a general-purpose batch distillation unit to be operated at atmospheric pressure. Heating bath heats and evaporates the contents of the vessel. The vapours are then condensed in the condenser, and are collected in a container or a receiver. The unit is complete with a spherical vessel, drain valve, heating bath, thermometer pocket, liquid inlet, vapour pipeline and a coil condenser. A receiver with drain valve can be added optionally. Refer Selection chart for different options available for heating bath, vessel and receiver. The unit is available in vessel size of 20, 50, 100 and 200 Litre. | ||||||||||||||||||||||||||
|
Product Details:
Usage/Application | Chemical Laboratory |
Type | Magnetic Stirrers with Hot plate 1 |
Mounting | Magnetic Stirrers with Hot plate 1 |
Material | Glass |
Brand | Magnetic Stirrers with Hot plate 1 |
Color | Magnetic Stirrers with Hot plate 1 |
Fractional Distillation Unit
This is a general purpose batch distillation unit to be operated under vaccum. Heating bath heats and evaporates the content to the vessel. Vapours enter into the packed column and get fractionated. Vapours of low boiling liquid enter into condenser, get condensed and collected into the twin receivers. From the final receiver distillate can be removed without breaking the vaccum. The unit is complete with a spherical vessel, drain valve heating bath, thermometer pocket, liquid inlet, packed column, a coil condenser, product cooler, and twin receivers. Refer selection chart for different options available for heating system vessel and receiver. The unit is available in vessel size of 20, 50, 100 and 200 Litre. | |||||||||||||||||||||||||||||||||||||||||
|
Product Details:
Color | Transparent |
Capacity | 10 - 200 Liters |
Material of Construction | Borosil Glass |
Country of Origin | Made in India |
LELESIL OFFERS Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculation fluid temperature and gives you best control over your work. It also helps prevent frost to form on the outside of the vessel, allowing you to see clearly into your material.
Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
All glassware is hand-made from food grade high borosilicate 3.3 glass that is heat/cold/corrosion-resistant.
Adjustable stirring rate provides great torque or high speed.
PTFE stirring rod bearing for reliable and quiet operation.
Optional multi-layer stirring blades for optimal reaction results.
Wide range of temperature operations, from-60°C to 200°C.
Large condenser cooling surface for exceptional condensation performance.
Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
Easily visual operation with digital speed and temperature displays.
Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
Easy-to-install modular design for exceptional ease and low cost of maintenance
Zero dead space bottom valve design
Product Details:
Capacity | Orbital Shakers |
Usage/Application | Orbital Shakers |
Design Type | Standard |
Size | Orbital Shakers |
Color | Orbital Shakers |
Nitrite | Orbital Shakers |
Chloride | Orbital Shakers |
Product Details:
Capacity | Oil Distillation Unit |
Usage/Application | Oil Distillation Unit |
Design Type | Standard |
Size | Oil Distillation Unit |
Color | Oil Distillation Unit |
Product Details:
Usage/Application | Industrial |
Design Type | Standard |
Size | Glass Simple Distillation System |
Country of Origin | Made in India |
Product Details:
Usage/Application | Industrial |
Design Type | Standard |
Reaction Unit
This is a general purpose batch reaction distillation unit to be operated atmospheric pressure, or vaccum. While heating bath heats and evaporates the contents of the vessel, the stirrer agitates to avoid heat spots. Vapours enter the condenser through reflux divider, & get condensed. The condensate is then cooled by a product cooler and collected into a receiver. The unit is complete with a spherical vessel, drain valve, heating bath thermometer pocket, liquid addition vessel, stirring assembly with drive, coil condenser with vapour pipeline, reflux divider, product, receiver with drain valve. Refer selection chart for different options available for heating bath, vessel, stirrer, motor, and receivers The unit is available in vessel size of 20, 50, 100 and 200 Litre. | |||||||||||||||||||||||||||||||||||||||||
|
Product Details:
Usage/Application | Industrial |
Design Type | Standard |
Reaction Distillation Unit This is a general purpose batch reaction distillation unit to be operated at atmospheric pressure, or vaccum. The only difference of this unit from above unit is that it is provided with agitator and liquid addition vessel. The unit is complete with a spherical vessel drain valve, heating bath, thermometer pocket, liquid addition vessel, agitator packed column, a coil condenser product cooler, and twin receivers. Refer selection chart for different options available for heating system vessel, stirrers and drives speed regulators and receivers. The unit is available in vessel size of 20, 50, 100 and 200 Litre. | |||||||||||||||||||||||||||||||||||||||||
|
Product Details:
Usage/Application | Industrial |
Design Type | Standard |
Condenser Over GLR This is general purpose batch reaction distillation unit to be operated at atmospheric pressure, or vacuum. | ||||||||||||||||||||||||||
|
Product Details:
Capacity | 1-2 KL |
Material | Glass Line Reactor |
Usage/Application | Industrial |
Max Pressure | 0-3 kg |
Max Temperature | Magnetic Stirrer With Heating |
Product Details:
Usage/Application | Chemical Laboratory |
Type | Quartz Wafer Boats |
Mounting | Quartz Wafer Boats |
Material | Glass |
Brand | Quartz Wafer Boats |
Model Name/Number | Quartz Wafer Boats |
Mode | Automatic |
Product Details:
Usage/Application | Chemical Laboratory |
Type | Borosilicate Water Distillation Unit |
Mounting | Borosilicate Water Distillation Unit |
Material | Glass |
Brand | Borosilicate Water Distillation Unit |
Color | Borosilicate Water Distillation Unit |
Place Of Origin | Borosilicate Water Distillation Unit |
Product Details:
Minimum Order Quantity | 1 Piece |
Type | Complete Glass-PTFE |
Mounting | MS - SS Frame |
Material | Borosilicate Glass |
Brand | LELESIL |
Country of Origin | Made in India |
Additional Information:
Product Details:
Usage/Application | Chemical Laboratory |
Type | Water Distiller |
Material | Glass |
Brand | Lelesil Innovative Systems |
Catalogue No | LEDD-SH-1.5 | LEDD-SH 4 |
Output Capacity | 1.5 liters / hr | 4 liters / hr |
Cooling water feed | 60 liters / hrs (approx) | 90 liters / hrs (approx) |
Biological Purity | PYROGEN FREE | PYROGEN FREE |
RH/PH | 6.9 - 7.0 | 6.9 - 7.0 |
Conductivity |js / cm | 0.5-0.9 | 0.5 - 0.9 |
Distillate Temperature | 75° ± 5°C | 75° ± 5°C |
Power required | 200 - 240 V 3KW Single Phase | 200 - 240 V 3KW Single Phase |
Product Details:
Application | Hospital |
Material | Stainless Steel |
Shape | Horizontal |
Mount Type | Floor Mounted Autoclave |
Automation Grade | Fully Automatic |
Approval Certificate | CE Certificate |
Installation | Yes |
Insulation Wall | Single Wall |
Country of Origin | Made in India |
Construction
1. Double walled chamber, Interior, Perforated Basket and the Doomed Lid made of polished Stainless and
tightened around by radial locking.
2. Exterior made of Stainless steel sheets/cold rolled mid steel sheet and finished in powder coating.
3. Heating elements are Immersion type.
4. The Unit is fitted with Neoprene Rubber Gasket to ensure tight sealing
5. Hydraulically tested upto 40 PSI as safety measure.
6. Std.Accessories: Water indicator, pressure gauge, steam release cock spring loaded safety valve., cord and plug.
Pressure Range: 20 psi.
Models available : Vertical / Horizontal
Sizes Available
Vertical : (Dia.x Ht) mm 250 x 450, 300 x 500, 350 x 550, 400 x 600
Horizontal: (Dia.x Ht) mm 350 x 550. 450 x 600, 550 x 750, 750 x 1100
Bigger sizes: On request.
Product Details:
Usage/Application | Chemical Laboratory |
Material | Glass |
Mode | Automatic |
Color | Water Distiller |
Frequency | Water Distiller |
Our company offers table top model of Barnstead Type Water Still to the clients.
The complete unit of barnstead type water still is made from stainless steel along
with complete argon welding. The high quality kettle type immersion heater is
provided with our highly efficient Manesty Type Water Still. We also inculcate
water level and drain facility in this barnstead type water still for efficient working.
Product Details:
Usage/Application | Chemical Laboratory |
Material | Glass |
Country of Origin | Made in India |
Capacity | Load |
2 ltrs per hr | 1.5 KW |
4 ltrs per hr | 3.0 KW |
6 ltrs per hr | 4.0 KW |
8 ltrs per hr | 6.0 KW |
10 ltrs per hr | 8.0 KW |
Product Details:
Country of Origin | Made in India |
HCL Absorption Tower HCL absorption columns are used for absorption of Hydrochloric gas which statutorily are not permitted to vent in to the atmosphere, and to produce the HCL acid. | |||||||||||||||||||||||||
|
Product Details:
Usage/Application | Chemical Laboratory |
Material | Glass |
Country of Origin | Made in India |
Product Details:
Country of Origin | Made in India |
Solid-Liquid Extraction Unit This a semi-batch unit designed for solid-liquid extraction as a means of separation. | |||||||||||||||||||||||||
|
Product Details:
Usage/Application | Chemical Laboratory |
Material | Glass |
Mode | Automatic |
Product Details:
Machine Type | Automatic |
Power Consumption | as per capacity |
Material | Borosilicate Glass |
Capacity | 20 - 200 liters |
Brand | LELESIL |
Voltage | 230V |
Reverse Rotation | Dual Direction |
Country of Origin | Made in India |
LELESIL has become through the competence in borosilicate glass 3.3, continuous improvement and close cooperation with the chemical and pharmaceutical industries the leader in the field: from the laboratory to the production scale.
As an example, we developed and improved continuously small-scale units for pharmaceutical industry requirements.
To ensure the high-quality requirements in this sector, various organizations such as EMA (European Medicines Agency), FDA (American Food and Drug Administration) and WHO publish GMP (Good Manufacturing Practice) guidelines that all companies are required to follow. To meet GMP standards, equipment has to be resistant to a wide range of chemicals and detergents and the surface finish must be easy to clean.
The main features designed for these GMP applications and in clean rooms with mixing and reaction containers up to 200 liters are:
· Reactor vessel in borosilicate glass 3.3 with fully draining
· bottom outlet with minimized dead space and with minimized residual fluid drops in the vessel after emptying zero Hold Up.
· bottom outlet valve for high-quality pharma applications, with a considerably reduced number of cleaning cycles required according to the standard control method with riboflavin;
· multiple lip seal operation dry and compliant with pharmaceutical standards;
· enameled impeller agitator for a smooth surface and agitator head max 600 Rpm;
· very wide and reliable operating temperature, from -20 ° C to 200 ° C;
· stirrer, motor, flange connections and stainless steel frame, special execution for clean room applications, optional for use in autoclaves;
· Corrosion-resistant Clamp adapters;
· inert corrosion resistant construction made exclusively with enamel, borosilicate 3.3 and PTFE for contact with the product;
Product Details:
Country of Origin | Made in India |
Product Details:
Usage/Application | Industrial |
Design Type | Standard |